I-BEAM WEBB TYPE OVERHEAD CONVEYORS

The conveyor chain is made of high carbon steel by hot forging method and
consists of 3 parts – side link, middle link and a pin. Since chain links are
connected to each other without rivets, chain assembly and dismantling is
very easy.
Conveyor trolleys consist of 2 symmetrical bodies made of hot forged high
carbon steel, between which carrier plates are attached and the bearings are
mounted on them. Bearings are special type conveyor bearings that can
operate at 200˚C. Trolley bearings are lubricated by means of grease fittings
on the bodies.
The trolleys mounted on the chain moved by the drive unit, work on the
principle of carrying the suspended loads by moving on the I-beam rail. The
conveyor rail is fixed by steel supports fixed to the ground. Due to the chain
structure, the webb conveyor is suitable for horizontal movements on the X
and Z axes as well as vertical movements on the Y axis.
Webb conveyors are manufactured as 3″ and 4″ types and trolley load
capacity is 120 kg, 250kg and 450kg per a hanger.